Accessories

Humid-1Wire 3M is a digital humidity sensor. Suitable for installation in indoor areas. RJ11 interface (1-wire). Compatible with all HWG units that have 1Wire input. Possibility to use in third-party installations, eg Loxone. Basic feature ...

Temperature sensor-50 ° C to + 125 ° C for outdoor environments. Sensing element in stainless steel may be used in pharmaceutical and food industry. ; Sensor in stainless steel 17240, waterproof PVC cable; Sensors can be connected in parallel to the ...

Tilting handle with an electronic lock from Southco for access control systems to the switchboard. Remote access to the switchboard via the web/SNMP can be controlled using the HWG-Sh4 unit. It is supplied with a 4m connecting cable. Where to use: Security of the shelter ...

Tilting rfid Klika Southco with electronic lock for access control systems to the switchboard. Communication RFID 125kHz, or 13.56 MHz. Ideal for solving access with HWG-Sh4 and SH4E. Precise and reliable design, for demanding conditions. Suitable p ...

Package content: length: 5m; 3x ending Southco;

HWG-SMS-GW3 is a gateway to send and receive alarm SMS over the GSM network. Another important feature is the setting of the set phone numbers in the alarm situation. Easy installation for monitoring from HW Group, but also the possibility to use separately, as ...

The detection set of cables to detect water leakage in a length of 2 m + 2 m. It is designed for HWG-WLD units and allows the detection of a very small amount of liquid (water, ethylene or other conductive liquid) due to the silky braid of the sucking water. Capillary created between ...

The detection set of cables to detect water leakage of 10 m + 2 m. It is designed for HWG-WLD units and allows the detection of a very small amount of liquid (water, ethylene or other conductive liquid) due to the silk braid of the sucking water. Capillaries created between

The detection set of cables to detect water leakage in the length of 50 m + 2 m. It is designed for HWG-WLD units and allows the detection of a very small amount of liquid (water, ethylene or other conductive liquid) due to the silky braid of the sucking water. Capillaries created between

Interior temperature, humidity detector, atmospheric pressure and volatile organic substances (TVOC) with 3M 1wire-Uni connection. The atmospheric pressure sensor is suitable for predicting the weather or for monitoring pressure leakage in overpressure or vice versa p ...

Temperature, humidity and CO2 interior detector with 3M 1Wire-Uni connection. Modern design for inconspicuous installations in offices, flats or public buildings. Suitable for all HWG units supporting 1Wire-Uni protocol. The presence of CO2 is increasingly ...

Temperature, stalk sensor on 3M cable with 1Wire connection. Durable digital temperature sensor, designed for measuring the temperature of gaseous and liquid substances. The Temp-1Wire 3M IP67 is designed for operation in a chemically non-aggressive environment. Suitable for all units P ...

Temperature, humidity and CO2 interior detector with 3M 1Wire-Uni connection. Modern design for inconspicuous installations in offices, flats or public buildings. Suitable for all HWG units supporting 1Wire-Uni protocol. The presence of CO2 is increasingly ...

Temperature sensor (-10 ° C K +80 ° C) designed for IT environments, for installation in IT cabinets (seagulls). A simple digital temperature sensor for the internal environment can be chained behind, communicating over 1-Wire BUS (microlan). Temp-1Wire is designed for already ...

Temperature sensor on a flat 3m cable, for easy installation in refrigerators and freezers. IP67 sensor for indoor and outdoor temperature measurement at 1Wire interface. Suitable for all units supporting 1Wire protocol. Where to use: Measurement of temperature in the spare ...

Digital temperature and humidity sensor. Suitable for installation in indoor areas. RJ11 interface (1-wire). Compatible with all HWG units that have 1Wire input. Suitable for all units supporting 1Wire protocol. Where to use: measurement of temperature in

Temperature and humidity sensor for IT bus (1-Wire) with two RJ12 connectors. The sensor is designed for mounting in a 19"seagull on the front/rear panel as 1U device, it can also be fastened from the side. Compatible with all HWG units that have 1Wire input. Where after ...

Temperature and humidity, interior sensor with 3 m connection 1wire. Modern design for inconspicuous installations in offices, flats or public buildings. Suitable for all units supporting 1Wire protocol. Where to use: museums, archives, exhibition space; TO...

The flood detector at one point. The sensor detects water flooding between four detection thorns on the body of the sensor. The sensor can be left on the floor (electrically non-conductive pad) or screw it into the floor or wall. The sensor is designed to detect ...