WiFi and Ethernet Thermometer STE2 r2

STE2 R2 is an Ethernet (not only) thermometer for remote temperature, humidity, air quality, CO2, etc. Communication through a classic Ethernet cable, or Wi-Fi. In the case of exceeding the permitted values, the alarm message sends up to two selected addresses. STE2 R2 can be connected to the cloud application hwportal.cz . When using the HWG-SMS-GW3 SMS Gateway, the alarm is also a SMS message.

Ethernet STE2 R2 thermometers now contain a second hardware revision that can connect up to 5 sensors using 1-Wire/1Wire-Uni and up to two detectors via digital inputs for DI contacts. Security, currently HTTP and HTTPS have also been updated. Another novelty is the possibility of setting different e-mail addresses for individual sensors (colleague 1 receives information about Lednice 1, colleague 2 then about refrigerator 2 etc ...). The same applies to SMS alarms using an SMS gateway. Saferange settings can also be made from the online application hwportal.cz

The appearance of the web interface has also undergone rejuvenation, the unit was"accelerated", more secure and improved Wi-Fi signal reception. Of course there is support of supervisory systems and free of charge to SW HWG-PDMS Free, for graphing and data exports to MS Excel. STE2 R2 is still packed in a design box in a set with a temperature sensor and a power supply.

• Rack box
• checking the refrigerators and freezers in the pharmacy
• food stores
• Archives, Libraries, Museums
• Thermometer and hygrometer in the household with security options (PIR, smoke detection, flood)

• 5x 1Wire/1Wire-Uni input for sensors; 2x digital input for detectors.
• Integration into the cloud application hwportal.cz
• 2x e-mail; 2x SMS + RING CAUTION, STE2 R2 includes the ability to dial the target number (requires an external gate)
• M2M Communication protocols: SNMP, XML, HWG-PUSH, WWW interface (HTTP and HTTPS-STE2 R2), where you can configure safe sensors for sensors
• Connected via LAN and WiFi. Configuration via the built-in Web Server.
• NMS connectivity (SNMP MIB); easy installation; pdpora DHCP; TLS support authentication (gmail).
• sensor value outside the set range or changing the di status of the input sends a warning via e-mail, sms or ringing.
• to ring or SMS can be used on the same LAN network located SMS gateway HWG-SMS-GW3.
• power supply 5V or POE.
• via HWG-PDMS software can be recorded data exported to MS Excel.
• Compatible with a series of third-party SW. Programmers will find examples of using the product in HWG-SDK (Borland C ++, MS Visual, VB, C#, PHP, Java, etc.).

• Power: 5V POE (IEEE 802.3AF)
• Dimensions: 65 x 80 x 30 mm
• Operating temperature:-10 to 60 ° C
• IP protocols: SNMP (V1 and V2), XML, HWG-PUSH
• Installation: On the wall on the DIN bar (the holder is not included)

• STE2 R2
• Temperature sensor Temp-1Wire 3M IP67 (-10 ° C to +80 ° C)
• power supply 5V/1.2 and International