Poseidon2 3468 monitoring unit with 230V/10A relay

Poseidon2 3468 allows connection of up to 8 sensors via 1-Wire Uni/1-Wire and up to 4 detectors via binary di inputs. Via Poseidon2 3468 can be controlled 2 into relay 230 V/10 A or up to 8 virtual digital outputs (VDO) on remote units Poseidon2 or Damocles2 (M2M).

In addition to the standard power supply of 9–30 V, Poseidon2 3468 can also be powered by a source of-48 V, so this device is also suitable for solutions in the Telco area.

Poseidon2 3468 has its own webserver for separate use, or can be integrated into the application hwportal.cz .

• Remote thermostat/trap supervisors-power supply, temperature/humidity, contact states. Can be used for remote restart technology.
• Industrial applications-remote supervision of contacts, 4-20mA sensors or PT100 and PT1000 thermometers. Logs the values to the internal memory.
• Monitoring of telecommunications points-48V-Poseidon2 3468 and its sensors can be powered from-48V DC.
• Power monitoring, backup sources and UPS-measurement of diesel amount in the tank, diesel-agregate status, remote start of IP, temperature and technological contact supervision.
• storage of food and medicines-logging of temperature-monitoring of storage conditions-warehouses, cold rooms, freezers and refrigerators. HACCP protocols can be created using application software.
• Information kiosky (terminals)/ATM ATMs.
• IP CCTV systems.
• remote opening of the gate.

• Ethernet: RJ45 (10/100 Base-T)
• Web: Built-in Web Server
• Logging of values: more than 250,000 records (internal flash)
• Sensors: 2xrj11-Max 8 external sensors (1-Wire/1-Wire Uni)
• to outputs: 2x to relay outputs (230V/16A)
• Power: 9-30V DC, but also-48V DC (telco standard)
• Mechanical design: DIN mounting, 145 x 90 x 40[mm]
• M2M Communication Protocols: SNMP, XML, Modbus/TCP, HWG-Push
• Sending SMS: Alarms can be sent as SMS (text message) via the remote"HWG-SMS-GW" connected over the network. It does not need any software.
• Local built-in functions: switching the output according to the value of the external sensor or on the DI input ("Thermostat" mode).
• Support for programmers: HWG-SDK
• Recommended online portal: hwportal.cz
• Supported software:
• HWG-Trigger: Control of other IP devices, redirecting alarm to SMS
• HWG-PDMS: Logging, export data to MS Excel, Reports
• Third Party Software (SCADA Systems, Modbus/TCP)

• Power: 9-30V-48V DC Telco Standard (-30V to-60V)
• Dimensions: 145 x 90 x 40 mm
• Operating temperature:-3 to 75 ° C
• IP protocols: SNMP (versions 1 and 3), XML, Modbus/TCP, HWG-Push
• Installation: on the wall or on the DIN rail (holder part of the housing)

• http
• https
• dhcp
• SNMP
• SNMP V1 + SNMP V3
• SNMP TRAP
• SNTP
• SMTP
• SMTP TLS
• xml
• hwg-push
• MQTT
• IPv6
• Modbus/TCP
• syslog
• net-gsm
• Number of e-mail addresses: 5

• Poseidon2 3468 (unit only)