Optical Networks

UbNT Fiber Instant is a GPPP module with one SC connector and is designed for UF-ae and F-Po-G2 products.

UBNT FIBER XGS/XG Optical Transceiver is a 10G optical transceiver designed for UISP Fiber OLT XGS. SFP+ module supports XGS-Pon data transfer speeds (9.95 GB/s uplink, 9.95 GB/s downlink) and XG-Pon (2.44 GB/s uplink, 9.95 GB/s Downlink).

BDCOM GP3600-04L is equipped with 4x Gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port. Supports asymmetric uplink 1.25 GBPS and Downlink 2.5 GBPS PON Transfer speed.

BDCOM GP3600-04L-2AC is equipped with 4x Gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port. Supports asymmetric uplink 1.25 GBPS and Downlink 2.5 GBPS PON Transfer speed. In addition, it has a built-in dual-AC power.

BDCOM OLT-GSFP-C ++ is a standard Gpon OLT SFP module C ++. It offers DownLink 2.5 GBPS and uplink 1.25 Gbps at the TX 1490nm/RX 1310nm wavelength and SC/UPC interface.

BDCOM GP3600-04L-AR is equipped with 4x Gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port. Supports asymmetric uplink 1.25 GBPS and Downlink 2.5 GBPS PON Transfer speed. In addition, DC has power (13.8 V/2.5 A).

BDCOM GP3600-08D is equipped with 8x gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port. Supports asymmetric uplink 1.25 GBPS and Downlink 2.5 GBPS PON Transfer speed.

BDCOM GP3600-08D-2AC is equipped with 8x gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port. Supports asymmetric uplink 1.25 GBPS and Downlink 2.5 GBPS PON Transfer speed. In addition, it has a built-in dual-AC power.

The BDCOM GP3600-08B is a compact Gon OLT from one of the world's largest manufacturers of network elements. This OLT is equipped with 8x gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port.

BDCOM GSFP-ST-02 is a miniature Gpon ont in the form of an SFP module where it is used wherever SFP shaft is available. As a result, no other element is needed, but the Gppon connection can be terminated directly in the standard SFP shaft of any switch or router.

The compact Gpon OnT designed for standard wiring boxes will offer not only discrete design, but also a pair of Ethernet (1 Gbps) ports.

BDCOM GP3600-16B is a compact Gpon OLT from one of the world's largest network elements manufacturers. This OLT is equipped with 16x gpon ports, 4x SFP ports, 4x Combo SFP/GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port.

BDCOM PWR-75-AC hotswap source for P3600 series (input voltage: AC 100 ~ 240 V). The maximum consumption is 75 W. The advantage is separate cooling by the fan.

BDCOM PWR-75-DC hotswap source for P3600 series (input voltage: DC 36 ~-72 V). The maximum consumption reaches 75 W. Separate fan cooling.

Blue Dragon Jet Hydro Chain Multi Tube is designed for blowing the microtube bundle into a pipe with a diameter of 32, 40 or 50 mm. The device is powered by a powerful hydraulic engine with a chain feeder-this combination ensures sufficient push ...

Reduction of a microtube 14/10mm (8mm) is used to connect microt runs of different diameters. Reduction ensures protection against water and dirt. It is resistant to microfibre blowing. It is not advisable to use it for microtubes stored directly in the ground. PR ...

BDCOM GP8600-16 is a compact Xgsgon OLT from one of the world's largest manufacturers of network elements. This OLT is equipped with 16x xgsgpon ports, 2x 100g QSFP28 ports, 8x SFP+ ports, 1x console port and 1x out-band port.

Hydraulic duct rod pushing device equipped with speed and force regulation and a meter counter. That gives you full control over the duct rod while pushing process. Replaceable holders are used to enable the use of various sizes of pipes. Practical, st...

The CRS304-4xG-in microtik is a compact and powerful 10 Gigabit Ethernet Switch designed to simplify the network settings. It is equipped with 4x 10g ports and 1x gigabit port for management purposes. It has four different power options: 2 DC connector, 2-pin and Poe-in.

The Blue Dragon Jet Max is a professional pneumatic drive device designed to blow cables and microt runs into HDPE pipes. Thanks to its simple and robust construction, it is very easy to use while maintaining a long life. The machine is supplied with a...

The Blue Dragon Jet Max Dual Head is a versatile pneumatic-drive belt device designed to blow cables and micro-tracks for HDPE pipes and cables into microtubes. Thanks to its simple and robust construction, it is very easy to use while maintaining a lo...

Renotronics RT-62 is a compact fully touch OTDR for measuring FTTH with a number of above-standard features (OPM, LS, VFL, Event maps and more). Despite its small dimensions, it will offer robust construction for field work when the optical infrared an...

NOYAFA NF-859GT is a multifunctional tool for measuring optical and metallic networks with a clear color display. The optical power meter is intended for measuring the received power of SM and MM fibers at wavelengths of 850/1300/1310/1490/1550/1625 nm in the range of ...