Passive components

The optical patchcord from Fiber Arsenal is the interconnection optical cable, which is finished with an optical connector at both ends. The most common use is for connecting devices inside the switchboards, connecting active elements to the optical route, or to the ...

Optical Simplex E2000 Simple Clutch for single-od cables. The clutch is designed to connect two E2000 connectors with APC grinding.

Optical switchboard 19", 1U, 24 x clutch SC/SC.

SC optical simplex clutch for multimodine cables. The clutch is designed to connect two SC connectors with PC grinding.

Front organizer for 19"distributor 1U.

SC optical duplex clutch for multimodine cables. The clutch is designed to connect two SC connectors with PC grinding.

Installation of the carriage, thanks to the original ingeniously simple handles ; toolless installation ; steel eye for attaching, for example, to a wall or column ; for self-supporting cables up to 3.5mm diameter ; Capacity 950N

Optical Patchcord 3M, Multimod 50/125, duplex, ST/ST

Optical patchcord 5m, multimod 50/125, duplex, ST/ST

Wall optical switchboard 24XST, metal.

Patchcord SM, 9/125, SC/PC-SC/PC, 2M, DUPLEX 2x 2,1mm, Fiber Arsenal

Optical pigtail from Fiber Arsenal is a pre-prepared fiber in semi-tight secondary protection (900 µm), terminated on one side by an optical connector. It is used to end the optical cable in the optical switchboard where you can connect individual fibers ...

Optical patchcord is an interconnecting optical cable, ending with optical connectors on both sides.

Protection of optical discord with steel reinforcement. Length 40 mm

Optical duplex LC clutch for multimode cables. The clutch is designed to connect two LC connectors with PC grinding.

Patchcord SM, 9/125, LC/PC-LC/PC, 5M, DUPLEX 2x 2,1mm, Fiber Arsenal

Optical patchcord is an interconnecting optical cable, ending with optical connectors on both sides.

Anchor for attaching a self-supporting round drop of 2-6mm diameter cable. ; &nbsp ; &nbsp ; The @"anchor is optimized to fully respect the minimum bending radius of the cable. This ensures zero pull-down, resp. the attenuation becomes negligib...

Patchcord SM, 9/125, SC/PC-SC/PC, 3M, DUPLEX 2x 2,1mm, Fiber Arsenal

Patchcord SM, 9/125, SC/PC-SC/PC, 5M, DUPLEX 2x 2,1mm, Fiber Arsenal

Optical pigtail from Fiber Arsenal is a pre-prepared fiber in semi-tight secondary protection (900 µm), terminated on one side by an optical connector. It is used to end the optical cable in the optical switchboard where you can connect individual fibers ...

Optical simplex LC coupling for singlemode cables. The clutch is designed to connect two LC connectors with PC grinding.

Inno Splice-on Connector SC-SM-UPC-30, OS1 9/125 SM, complete including welding protection, attenuation up to 0.2dB

The optical patchcord from Fiber Arsenal is the interconnection optical cable, which is finished with an optical connector at both ends. The most common use is for connecting devices inside the switchboards, connecting active elements to the optical route, or to the ...