Installation cable S/FTP Cat7+Cat5, outdoor, UV protected

Cat.7 S/FTP cable with UV clouding into the outdoor environment. The cable corresponds to the IEC 61156-5 Cat.7 and consists of four individually shielded pairs and two additional twisted pairs-all together by shielded brass and covered with PVC sheath resistant UV radiation with self-extinguishing effect.

Construction:

• conductor: a copper wire diameter 0.58 mm (AWG 23)
  • insulation: SFS PO, outer diameter 1.43 mm
  • Number of wires: 8
  • wires curled in a couple, number of couples: 4
  • color code: white-blue, white-orange, white-green, white-brown
  • Shielding pairs: pairs are packed in polyester-al foil (al layer oriented out), shield 100#i6per#
  • arrangement of couples: pairs are placed in a cloak into a circle around the additional pairs
  • Additional pairs: copper wire diameter 0.51 mm (AWG 24)
  • insulation: SFS PO, outer diameter 0.8 mm
  • loop resistance: 95 ohm/km at 20 ° C
  • Impedance: 100 Ohm
  • Number of additional wires: 4
  • wires curled in a couple, number of couples: 2
  • color code: white-blue, white-orange
  • External shielding: tinted copper wires in knitting with 65#i6per#
  • outer sheath: UV resistant FR-PVC material
  • wall thickness: 1.5 mm
  • Color: black
  • outer diameter: 9.8 mm nominally
  • Installation temperature:-30 + 70 ° C
  • Flame test: According to UL VW-1 and IEC60332-1
  • minimum bending radius: 105 mm
  • Cable weight: 85 kg/km

  Electric parameters:

  • characteristic impedance: 100 Ohm +/-15 Ohm for 1-600 MHz
  • loop resistance: max 75.0 ohm/km at 20 ° C
  • Dielectric fortress: 700 in Central test. 1 minute
  • insulating resistance: min 5 Gohm/km at 500 V SS, 20 ° C
  • spread speed: 70-80# i6per# nominally
  • attenuation: max 49 dB/100 m 600 MHz