Napájení a UPS

Passive PoE module 1 Gbps, 83 W, IP20, plug-in, with a return fuse, with overvoltage protection 5 ka

Passive PoE.H 1Gb passive module with overvoltage protection and DIN rail protection ; ; Operating voltage: 8-56V via a removable connector ; Output current: 1.4A max. (0.35A/500mA fuse protected) ; Operating temperature:-30-+ 60 ° C ; Local...

Mains supply 85-265V ~ 50Hz/55V (1.5A), DIN rail, power passive PoE 1Gb, optional power conductors.

; The DL2U Injector/Distribution (15x) is a 19"chassis with a height of 2U, which contains 15 positions for PoE.Z 1Gb PoE.EU plug-in module or DL.Z 24480303. The individual positions are numbered 1-15. Positions can be masked by means of patches (not...

DC plug-in power module, with two fuses 3 and +24 V settings, or-48 V for each output separately.

Empty position cover instead of poe.z, or dl.z

DC/DC converter 18-35V/220V (0.6a), with attaching to DIN bar.

DC/DC converter 42-72V/220V (0.6a), with attachment to DIN bar.

Backup power 3x230V ~ 50Hz/55.2V (45A) 19"2U, with supervision PMVer1, the possibility of parallel shifting, rapid

Power DC bar, 19"1U, combining 1x input to 4x outputs (4x 10 A), without LED signaling

Network source 230V ~ 50Hz/54.5V (2a), with attaching to DIN rail, PFC, double output + PE ground clamp.

Mesh power supply 100-240V ~ 50/60Hz/55.2V (2.5A) with assembly on DIN rail, pfc. duplicated output + PE ground clamp and IU VA characteristic.

The LS110.JS backup power supply, with 280 W, is used for backed-up 24 V and 48 V power supply.

Network source 85-265V ~ 50Hz/48V (1a), DIN bar, passive POE 1GB, optional power wires.

Industrial DC/DC converter 36-75V/24V (6A) with galvanic separation, with remote signaling Soft Start and Preventenia on DIN rail.

Industrial DC/DC converter 36-75V/24V (12A) with galvanic separation, with remote signal Soft Start and prevenedenia on DIN rail.

Fully on the free position of POE.Z and DL modules for module sources IMCO POWER-1pc in the package.

Parallel connection 2 inputs 9-72V/2a in one output 9-72V/2a

The backup power supply LS1000.H 48241509 is used for backup power supply 48 V (55,2 V) and 24 V DC . The total output power of the power supply is 900W. The source has two output voltages where both levels are galvanically separated.

The LIFEPO4 battery block is a solution suitable for backup systems that often cycle or work in an outdoor environment. Thanks to the properties of LIFEPO4 batteries, it is possible to significantly change their weight while maintaining high capacity and long life.

Passive PoE module 1 GBPS, 83 W, IP20, plug-in, with return fuse, with overvoltage protection 5 ka

Backed source on DIN rail with an output of 240 W, 230V ~ 50Hz/14.6 V (16 A), PFC + LLC (ZVS), with SNMP + http, heartbeat. Compensation, automatic./manual. Capacity test, short circuit protection and battery connection with opposite polarity.

Backed source 280W, 230V ~ 50Hz/+27.6V (10A), PFC +LLC (ZVS), with DC/DC converter +48V (4A), with DIN mount, pulse. compensating with battery charging, 2 charging current levels and short-circuit protection.