Gigabit shielded 24-port passive PoE panel

Panel up to 19"seagulls integrating 24 gigabit shielded active Poe injectors with power range 24-56 V .

Universal solution for remote power supply of more active elements with integrated extractor after UTP cabling.

Refundable current fuse up to 650mA (+/-15#i6per#) on each port, grounding brought to time.

Input for power via two 2.1mm 60V jacks
If the power adapter is connected to only one of the power inputs, all 24 ports are powered.
In the case of connecting the power adapters to both power inputs, ports 1-12 are powered from the first input, from the second input of the port 13-24.

POE Panel works in B:
Therefore, the panel is compatible with active elements with integrated POE injector using 4/5+ and 7/8-(such as active elements of microtics, Ubiquiti).
(Does not support the power of active elements using 1/2-and 3/6+ pins to power pins such as IP, cameras, IP phones, active elements of Cisco, etc.)

Power supply is not included in the delivery, choice and power parameters of the source must be optimized according to the appropriate collection of the powered elements and their configuration.

Maximum allowed power input values on the input of the POE panel:
24V: 576W (24A)
48V: 1152W (24A)

Notice:
It is not possible to combine the involvement of UBIQUITI 100Mbps products requiring 24V sources and products requiring 48V source due to the different behavior of the PoE port Ubiquiti devices powered by 24V from eg port behavior in microtics products.

parameters:

name	value
input:	24-56V/150W (2x 2.1 60V Power Jack)
Data:	1/2 &3/6 &4/5 &7/8
POE standards:	Passive poe
Ethernet:	TIA/EIA 568 CAT. 5, Cat6e
Data Rate:	10/100/1000MBPS
Connector type:	rj-45
operating temperature range:	0 ° C ~ +40 ° C
moisture (operation.):	10# i6per# ~ 80# i6per# rh
Dimensions[mm]:	483 × 44 × 52
Weight[kg]:	1.4