Gigabit shielded 12-port passive PoE panel

Panel up to 19"seagulls integrating 12 gigabit shielded active Poe injectors with power range 24-57V.

Universal solution for remote power of more active elements with integrated extractor after UTP cabling.

Over-Current Protection (current protection) up to 650mA (+/-15#i6per#) on each port, grounding brought to time.

Three-stage LED signaling of current values on three ports of ports.
Port Current 0-20MA (No Signal)
Port Current 0-400MA (Green LED)
Port Current> 400MA (Red LED)

Add this through panel to the switchboard to get a power center that you can easily connect between the existing switch and patchpanel, which already leads to a powered device (IP camera, IP telephone, wireless elements, etc.).

Input for power via two 2.1mm 60V jacks, both inputs are always powered by all 12 ports in mode according to selected A /B input:

Mode A:
Compatible with active elements with integrated POE injector using 1/2-and 3/6+ (such as Cisco). Data after all 4 pairs.

MODE B:.
Compatible with active elements with integrated POE injector using 4/5+ and 7/8-(such as microtics, Ubiquiti). Data after all 4 pairs.

The power supply is not included in the delivery, option and power parameters of the source must be optimized according to the appropriate collection of the powered elements and their configuration.


Technical Specifications

• Input: 24-57V/120W (2x 2.1 60V Power Jack)
• Data: 1/2 &3/6 &4/5 &7/8
• Power: a) 4/5+ &7/8-(48V)
B) 1/2-&3/6+ (48V)
• Weight: 1.2kg
• Dimensions: 482.6mm × 44.3mm × 52mm
• Ethernet: TIA/EIA 568 Cat. 5
• Standards: IEEE 802.3AF (48V, 400MA)
• Rate data: 10/100/1000mbps
• Connectors: 12x Shielded GB RJ-45
• Operating Temperature: 0 ° C ~ 40 ° C
• Storage Temperature:-40 ° C ~ +70 ° C
• Operating humidity: 10#i6per#~ 80#i6per#rh
• Storage humidity: 5#i6per#~ 90#i6per#rh
• Certifications: CE