CO2 sensor 1Wire-UNI

Temperature, humidity and CO2 interior detector with 3M 1Wire-Uni connection. Modern design for inconspicuous installations in offices, flats or public buildings. Suitable for all HWG units supporting 1Wire-Uni.

The presence of CO2 is an increasingly discussed problem in premises with a high concentration of persons. It is proven that"exhaled" air with a high CO2 content has a very negative impact on attention, fatigue and higher doses and on the health of the population. Installation of CO2 monitoring becomes common in educational premises and in the private sector.

• Schools, kindergartens, places with higher concentration of persons
• offices, meeting rooms, corridors
• apartment buildings, hotels, guest houses
• offices, waiting rooms, sports halls

• temperature
• Measurement range--30-+70 ° C
• measurement accuracy-0.8 ° C
• resolution-0.1 °
• moisture
• Measurement range-0-100 # i6per # rh
• Measurement accuracy-5# i6per# rh at 25 ° C
• resolution-0.1 # i6per # rh
• CO2
• Measurement range-300-40000 ppm
• resolution-1 ppm in range 0 ppm-2008 ppm, 6ppm in 2008 ppm-11110 ppm and 32ppm in the range of 11110 ppm-60000 ppm
• Measurement accuracy-50ppm + 3 #i6per #
• temperature stability ± 2.5 ppm/° C (in the range of 0-50 ° C)

• Maximum length 1-Wire bus-20m
• Maximum number of sensors per 1-Wire UNI port-1 (in case of multiple need to use 1-Wire Hub Power)
• sensor dimensions-60x60x20 mm
• degree of protection-IP30
• Communication interface-bus 1-Wire via RJ-11 connector.
• Combined sensor 3 values -on the bus looks like 3 independent sensors
• Power supply 5V out of 1-Wire port

• CO2 sensor 1wire-Uni