Action set: Alcoma AL10D V32 with 32Mbps/s (10GHz) and HotSpot (5GHz)

The action set, which includes a free band connection Alcoma AL10D V32 (including 65 cm antennas) + fully mounted HotSpot is a complete solution for your connectivity while maintaining high bandwidth, latency, reliability, minimization of interference and extra easy installation!

Mega price-with this you will save an incredible $ 8,900 !!

The action is valid until the inventory is canceled or sold out!

----------------------------------------------- -------------------

1. Alcoma AL10D V32:

AL10D   V32 are point-to-point microwave links designed for cheap and easy construction of the last miles of telecommunication networks.

The AL10D V32 is further subject to the following action conditions:

• Extended Warranty 48 Months
• SLA for 6 months free of charge
• Guarantees upgrade to 88Mbit for $ 59,000  

This link may already be 1 610,-/month. We also offer the possibility to finance a pay-as-you-go payment without raising-in the form of 6 monthly installments.

  Antenna systems can be arbitrarily combined to achieve optimal resultant link parameters. Please contact

For calculation and design of the connection please contact us. "Demand form" here . &Nbsp;

Approximate range of AL10D &V32 for 10 GHz band with ME 65cm antenna
at 3dBm. Range is reported in km for the 20 dB reserve and BER = 10 ^-6

16 Mbit/s baud rate   - 12km
Bitrate 32 Mbit/s-   8km

 
AL10D   V32 is next generation of the proven link   AL10D MEII with the same surveillance system and a new parabolic antenna of 65cm with OPN. All transmission parameters and link reliability remain. The link operates in the free band 10.3-10.6 GHz according to VO-R/14/12.2006-38, its construction is subject to no registration or notification duty and operation is not charged.
     

Advantages of 10.3-10.6 GHz band connections
Joints always work at full speed
Connection is fully duplex
Connection error is less than 10 ¹¹
While adhering to the basic construction rules, several tens of joints can be placed at one point without affecting each other

Why use AL10D V32?
Verified high operational reliability
High resistance to interference from other connections and other types of interference while complying with standards for both radio and electromagnetic emission standards (joining construction rules does not interfere with other communications, radio amateur broadcasting and does not adversely affect operation of other electrical equipment)
Easy and fast assembly, compact design without connectors and indoor units
Roll out of the surveillance system including the possibility to adjust both sides from one location
Change polarization by turning the outer unit by 90o
Preservation ASD supervision and diagnostics, SNMP surveillance
4FSK modulation, less bandwidth, adherence to recommended channel table = > possibility to mount multiple connections
One S-STP cable cat. 7 transmits user data and power to external drive

Ethenet interface properties:
Ethernet interface speed control from 1024 kbps to 32 Mbit/s
VLAN transparent
Option to enable autonegotiation or manually set Ethernet parameters
Track delays are in order of magnitude in ms even in full load

----------------------------------------------- ------------------

2. HotSpot:

The complete solution for your Hot Spot consisting of 1 piece of complete unit on the MikroTik RB433AH platform (including 3 MiniPCI cards)   and 2 pcs 120th. antennas for the 5 GHz band

Drive Features   including Antenna and RB 433AH:

• frequency range 5150-5850
• gain 15 dBi
• VSWR less than 1.5
• radiation angle 120 ° H, 8 ° V
• F/B ratio-dB > 25
• polarization: vertical
• impendance: 50 ohms
• N-female connector
• max. input power: 100 W
• Dimensions 450x165x89
• Mounting on a mast of 30-50 mm diameter
• weight 2.15  
• in the unit Mikrotik RB433AH, 3xpigtail, 3xMiniPCI card

Antenna properties:

• frequency range 5150-5850
• gain 15 dBi
• radiation angle 120 ° H, 8 ° V
• F/B ratio-dB > 25    
• VSWR less than 1.5
• polarization: vertical
• impendance: 50 ohms
• N-female connector
• max. input power: 100 W
• Dimensions 450x165x35
• Mounting on a mast of 30-50 mm diameter
• Weight   1.42
• Radium Material: ABS  

HotSpot   contains: source (24V 2A), PoE, interconnect cables, 2 antennas + 1 micropic antenna & STRONG>.